5 Stage SS Washer with a 30" wide by 72" tall work opening. The overall length is 68 ft. with stage 1 and 3 heated with Maxon burners and gas train. This piece of equipment is located out west. More pictures available upon request.
Large Powder System
The equipment is located in the Midwest and is presently operating. This system was built by GAT and has an 8 ft. wide by 7 ft. tall work opening. The washer is 5 stage stainless bottom and poly upper housing. It is set up for 8-10 ft. a minute with 3 stages being heated. The conveyor system is a 668 with very heavy hangers for doing heavy parts. The dry off oven is a straight-through pass with 8 minutes of dwell time straight through design with 2 burner boxes. The curing oven is built similar to the dry off except it is a serpentine design. There are 2 powder booths; one is a Nordson with an 8 ft by 7 ft. work opening. This is a manual booth with 2 colored modules. The second booth is fully automatic with UV detection and a 3 ft. by 6 ft. work opening. Automatic guns with recips. UV detection with manual touch up. There is also a wastewater treatment system that is available with this unit. More pictures available upon request.
Wagner Powder Booths
We have 2 SS Wagner Powder Booths with work openings of 4 ft. wide by 7 ft. tall. The first booth is 18 ft. long and the second booth is 24 ft. long. Both booths are complete with collectors, filter module and controls. There are 2 manual guns per booth. The equipment is disassembled and sitting in Coating Equipment's warehouse. More pictures available upon request.
Two-Stage Belt Washer with Gas Fired Dry Off Oven
The belt is 48 in. wide. The dry off oven is equipped with high-velocity fans and Maxon burner and gas trains. This unit has been taken out of service and is ready to be loaded onto someone's truck. More pictures available upon request.
Two Stage High Speed Belt Washer
This washer has a 60 in. wide belt and has been used very little. This unit is equipped with air knives in several locations. The unit is gas-fired and in excellent condition. More pictures available upon request.
668 Conveyor System (Heavy Duty)
We have available a 6 in. monorail conveyor system that has approximately 750 ft. of chain. We also have a Caterpillar drive unit. We also have an air and spring-loaded heavy duty take up along with 2 180 degree roller turns. There are available 6 90 degree roller turns. The conveyor system is in excellent working order. We will have pictures very soon. More pictures available upon request.
Large E-Coat System
This system is a TTX system that is in excellent working order. It has a 13 stage pre-treatment with an overhead curing oven and cool down. There is also approximately 1500 ft. of 458 power and free conveyor system. Everything goes with this unit except the RO system. The tanks are 9 ft. wide, 6 ft. deep and 46 in. in the direction of travel. More pictures available upon request.
Monorail E-Coat System
10 stage pre-treatment, gas-fired with a 3 ft. by 6 ft. work opening. This unit is complete and still under power. The curing oven can reach a max of 450 degrees. This system is set up for 10 to 12 ft. a minute or less. This unit has a very attractive price tag. Call for details. More pictures available upon request.
We have several batch ovens available in excellent condition, some may need a paint job. Call to get a list of the ovens available. More pictures available upon request.